Fully pre-assembled unit consisting of:

TECE flush-mounted cistern with front actuation:
- safety tank made of impact-resistant plastic
- cistern fully pre-assembled and sealed
- angle valve and cistern connection pre-assembled, cistern connection with 1/2" female thread
- 10-litre tank volume, 6-litre preset standard flush volume, 4.5/7.5/9-litre flush volume can be set at any time; 3-litre part-flush with dual flush technology. Residual volume available for immediate cleaning rinse. Insulated against condensation water
- can be set as a single or dual flush cistern depending on the flush plate used

Module consisting of:
- self-supporting assembly frame with powder-coated surface
- two adjustable supports for floor projections of 0 - 200 mm
- two M12 retaining bolts and M12 nuts
- 180 or 230 mm crossbeams for attaching the toilet
- DN 90 toilet drain bend with DN 90/100 reducer, material PP
- reducer is also suitable for horizontal installation
- DN 90 toilet connection set, including protective plug



please order separately: toilet flush plate and fitting for individual pre-wall installation, corner or wooden post-and-beam structures.

Note: when using ceramic toilets with reduced support surface (e.g. Villeroy & Boch Memento, Sentique, Subway 2.0 you will need to install the steel support set 9041029 in the lower construction space (available separately).

Tested in accordance with DIN 19542 certificate 7391275-01z; fittings group 1 in accordance with DIN 4109 test certificate P-IX3837/I; low-noise hydraulic fill valve LAP ≤ 17 dB(A) at 3 bar flow pressure; heightened ceramic mounting for 48 cm seat height in accordance with DIN 18024-2 is possible. (DIN 18024-2: Barrier-free construction - Part 2: Publicly accessible buildings and workplaces).